How to Install the Comfort Equipment in a DIY Sauna with a Solid Back Wall or Half Panorama?

Installation of the Outdoor Bench:

1. Position the Bench:
   • Place the outdoor bench against the wall.
2. Secure the Bench:
   • Screw it in place with six 4x50 screws.
   • Screw each leg to the formwork with two 4x50 screws at an angle into the leg.

Attaching the Planks to the Outdoor Bench:

1. Secure the Planks:
   • Screw the planks to the legs with two 4x50 screws per plank.
2. Maintain Even Spacing:
   • Use a 7 mm filler plate to keep the distance between each plank the same.
   • Ensure the distance between the bottom plank and the formwork is approximately 5 mm.

Installation of the Indoor Bench (Solid Back Wall or Half Panorama Wall):

1. Position the Bench:
   • Place the indoor bench against the wall.
2. Secure the Bench:
   • Screw it in place with six 4x50 screws, both left and right.
   • Screw each leg to the formwork with two 4x50 screws at an angle into the leg.

Attaching the Planks to the Inside Bench:

1. Secure the Planks:
   • Screw the planks to the bench with five 4x50 screws per plank.
2. Maintain Even Spacing:
   • Use a 7 mm filler plate to keep the distance between each plank the same.
   • Ensure the distance between the bottom plank and the formwork is approximately 5 mm.

Attaching the Backrest:

1. Position the Backrest:
   • The distance between the bottom of the backrest and the top of the bench should be 20 cm.
2. Secure the Backrest:
   • Use four 4x60 screws to attach the backrest.

Repeat Steps 1 to 5 for the Other Side of the Sauna:

• Follow the same steps to install the outside bench, inside bench, and backrest on the other side of the sauna.

Installing the Floors:

1. Insert the Floors:
   • Place the 90 cm long floor against the back wall.
2. No Screws Needed:
   • It is not necessary to screw the floors.

You can find a detailed step-by-step explanation in our manual.