These steps describe the installation of natural stone in the sauna, with a distinction being made between a wood stove and an electric stove.
Installing Natural Stone with a Wood Stove
Attaching Natural Stone to the Back Wall:
- Apply Adhesive:
- Apply four lines of adhesive to the back wall, directly above the floor, approximately 50 cm high and a maximum of 50 cm wide.
- Place the First Stone:
- Place the first 60 x 60 cm stone against the adhesive.
Attaching the Second Layer of Natural Stone:
- Apply Adhesive:
- Apply four lines of adhesive to the back wall directly above the first stone, approximately 50 cm high and a maximum of 50 cm wide.
- Place the Second Stone:
- Place the second 60 x 60 cm stone against the adhesive.
Attaching the Third Layer of Natural Stone:
- Apply Adhesive:
- Apply four lines of adhesive to the floor against the rear stone.
- Place the Third Stone:
- Place a 60 x 30 cm stone against the adhesive.
Attaching the Fourth Layer of Natural Stone:
- Apply Adhesive:
- Apply four lines of adhesive to the floor against the back stone.
- Place the Fourth Stone:
- Place a 60 x 60 cm stone against the adhesive.
Placing Natural Stone Near an Electric Heater
Attaching Natural Stone to the Back Wall:
- Apply Adhesive:
- Apply four lines of adhesive to the back wall, directly above the floor, approximately 50 cm high and a maximum of 50 cm wide.
- Place the First Stone:
- Place the first 60 x 60 cm stone against the adhesive.
Attaching the Second Layer of Natural Stone:
- Apply Adhesive:
- Apply four lines of adhesive to the back wall directly above the first stone, approximately 25 cm high and a maximum of 50 cm wide.
- Place the Second Stone:
- Place a 30 x 60 cm stone against the adhesive.
Attaching the Third Layer of Natural Stone:
- Apply Adhesive:
- Apply four lines of adhesive to the floor against the back stone.
- Place the Third Stone:
- Place a 60 x 60 cm stone against the adhesive.
A detailed step-by-step explanation can be found in our manual.