These steps describe the installation of the interior with the basic interior for a sauna with a solid back wall or half panorama wall.
Attaching the Support of the Base Bench:
- Screw the Support:
- Screw the support of the base bench to the wall with three 4.5x60 screws.
- The bottom of the support should be approximately 55 cm from the middle full moon profile.
Positioning the Bench on the Support:
- Place the Bench:
- Place the bench on the support.
Attaching the Leg of the Bench:
- Secure the Leg:
- Screw the leg from behind the bench with two 4x20 screws.
Supporting the Bench:
- Add Support Blocks:
- Screw two blocks against the half-moon profile to support the bench and create stability.
Placing the Supports for the Large Bench:
- Screw the Supports:
- Screw two supports against the inside of the front and back walls.
- The bottom of the supports should be approximately 55 cm from the bottom middle full moon profile.
Positioning and Attaching the Large Bench:
- Place the Bench:
- Place the large bench on the two supports.
- Add Support Blocks:
- Screw five blocks against the moon profile so that the top of these blocks support the bench.
Repeat Steps 1 to 6 for the Other Side of the Sauna:
- Follow the same steps to install the base bench and the large bench on the other side of the sauna.
A detailed step-by-step explanation can be found in our manual.