How to Install the Electric Heater in Your DIY Sauna

Drilling a Hole for the Cable Connection:

1. Drill the Hole:
   • Use an 18mm drill bit to drill a hole for the heater cable. Drill through the tile, the floor, and the formwork to the outside.
   • The hole should be 14 cm from the back of the tile.

Installing and Connecting the Electric Heater:

1. Install the Heater:
   • Install the heater according to the heater instructions.
2. Pull the Cable:
   • Pull the cable through the hole to the outside.
3. Fill the Heater:
   • Only fill the heater with stones after a successful test.

Attaching the Switch Box:

1. Screw the Box:
   • Screw the switch box onto the rear skid of the sauna (left or right).
2. Pull the Cable:
   • Pull the heater cable to the switch box.
3. Connect the Electricity:
   • Always have a certified electrician connect the sauna's electricity.

You can find a detailed step-by-step explanation in our manual.