These steps describe the installation of the interior with the comfort equipment for a sauna with a full panorama wall.
Installation of the Outdoor Bench:
- Position the Bench:
- Place the outdoor bench against the wall.
- Secure the Bench:
- Screw it in place with six 4x50 screws.
- Screw each leg to the formwork with two 4x50 screws at an angle into the leg.
Attaching the Planks to the Outdoor Bench:
- Secure the Planks:
- Screw the planks to the legs with two 4x50 screws per plank.
- Maintain Even Spacing:
- Use a 7 mm filler plate to keep the distance between each plank the same.
- Ensure the distance between the bottom plank and the formwork is approximately 5 mm.
Installation of the Indoor Bench (Full Panorama Wall):
- Position the Bench:
- Place the indoor bench against the wall.
- Secure the Bench:
- Screw it in place with six 4x50 screws.
- Screw each leg to the formwork with two 4x50 screws at an angle into the leg.
Attaching Planks to the Inside Bench:
- Secure the Planks:
- Screw the planks to the bench using five 4x50 screws per plank.
- Maintain Even Spacing:
- Use a 7 mm filler plate to keep the distance between each plank the same.
- Ensure the distance between the bottom plank and the formwork is approximately 5 mm.
Attaching Leg to Window Side:
- Secure the Leg:
- Screw the leg to the window side using four 4.5x60 screws.
- Position the screws close to the formwork.
Attaching the Backrest:
- Position the Backrest:
- The distance between the bottom of the backrest and the top of the bench should be 20 cm.
- Secure the Backrest:
- Use four 4x60 screws to attach the backrest.
Repeat Steps 1 Through 6 for the Other Side of the Sauna:
- Follow the same steps to install the outside bench, inside bench, and backrest on the other side of the sauna.
Installing Floors:
- Insert the Floors:
- Place the 90 cm long floor against the back wall.
- No Screws Needed:
- It is not necessary to screw the floors.
You can find a detailed step-by-step explanation in our manual.