If you have chosen for external delivery the hot tub will be delivered by an external party. You will then need to connect the biofuel stove yourself.
1. Connect the Filter System
First, connect the filter system. You do not need to install the UV filter; we have already done that for you.
2. Connect the Fuel Stove
Next, place the fuel heater to the left of the filter box and connect the two hoses coming out of the box to the black connectors on the heater. Check first that the rubber washers are still on the connections to prevent leaks. Tighten the connections firmly by hand.
3. Connecting the Power
Bring the plug into the filter box so that you can connect it to the socket in the box.
4. Fill the Diesel Tank
The red diesel tank is already connected to the stove. You can now fill it. Make sure that the tap to supply fuel to the stove is open. It is located behind the door at the bottom of the stove.
5. Turning on the System
When the hot tub is filled with water, you can connect the filter system and heater to power. It is important that the stove always runs together with the filter system, including the UV filter, to provide water circulation to the stove at all times and to ensure that the stove does not overheat.