Hot tub
      Back to home
      1. Help Center
      2. Connection & Self-Assembly
      3. Hot tub

      What do I need to connect myself if I choose external delivery? (in 6 steps)

      If you choose delivery with a crane, the hot tub will be delivered by a third party. This means there are still a few things you need to install and connect in the garden yourself.

      These are small things like the side table and banister if you have chosen them, but also the wood stove and filter system are delivered separately. This is really not difficult, and with the instructions, you can do it easily.

      1. Position Your Hot Tub

      Place your hot tub in the desired spot in your garden. Choose a spot where you feel comfortable and where you have the best view!

      2. Remove Protective Materials

      Remove the plastic and cardboard that surround your hot tub. These protect your hot tub during transport, but now it's time to remove them.

      3. Connect the Wood Stove/Biofuel Stove

      Connecting the Wood Stove

      Depending on the model you chose, follow the specific instructions:

      Connecting the Biofuel Stove

      1. Make sure there is enough fuel in the fuel tank.
      2. Open the wing nut at the bottom of the fuel pump (turn 2-3 times).
      3. Plug the biofuel stove into the outlet in the filter box.
      4. Press the power button to turn the unit on.
      5. The fuel pump will automatically draw in fuel. If the lines are still completely empty, the unit will give an error message. Turn the unit off and back on, and repeat until a small amount of fuel runs out of the fuel pump, and the burner continues to fire without an error message.
      6. Retighten the wing nut at the bottom of the fuel pump so that no more fuel is leaking from the fuel pump.

      If the fuel tank becomes completely empty during operation, this process may need to be repeated.

      4. Set Up the Filter System

      A good filtration system will keep your water clear and clean. Here are the [instructions for connecting your filter pump].

      5. Add the Finishing Touches

      1. Place the steps in the desired spot next to your hot tub.
      2. If you have a side table, attach it in the desired spot with the screws provided.
      3. Finally, remove your cover and place it over your hot tub.

      6. Prepare Your Hot Tub for Use

      • Fill your hot tub with water and add a disinfectant such as AquaClean or Always Blue (available in our shop) as desired.
      • Turn on the filtration system and connect the other systems to the mains.
      • Then heat the water and your hot tub is ready to use!

      Still have questions? Feel free to contact our service department or check out the helpful videos we've posted on our YouTube. Enjoy your Welvaere moments! 🛁🌿