How do I maintain my glass filter system?

If there is dirt in the filter system, the pressure in the filter tank rises. If it has risen by 1.5 bar, it is time for a backwash. This rinses the pump clean.

How often this is necessary depends on how you use your hot tub. On average, once every 3—6 weeks is sufficient. We also recommend that you always backwash as soon as you refill the hot tub so that residual dirt does not end up in the clean water.

Use the backwash function

Grey ton

1. Set up the pump outta and unplug it.
2. Raise the pump handle Backwash.
3. Plug it back into the socket and turn on the pump.
4. Leave the pump approximately 1 minute of running or until the water in the peephole is clean.
5. Turn the pump off again and turn the handle on Rinse.
6. Turn on the pump and run for about 30 seconds to rinse the head.
7. Turn off the pump again and put the handle back on Filter.

Blue ton

1. Set up the pump outta and unplug it.
2. Turn the valve on top of the barrel to the position Backwash.
3. Turn on the pump and run for about 1 minute until the water coming out of the drain is clear.
4. Turn off the pump and turn the valve to Rinse.
5. Turn on the pump and run for ± 30 seconds.
6. Turn off the pump and turn the valve back to Filter.

Replace filter glass

It is best to replace the filter glass that purifies the water once every 2 to 3 years. This way, the effect remains optimal. You can easily order this filter glass from us.

👉 In this video you will find an instruction for replacing the filter glass.

UV lamp replacement

Over time, the UV lamp in the filter system may need to be replaced.

👉 In this video we explain step by step how to do this.

‍